iPhone 4 Front Glass Digitizer Replacement Repair HD Tutorial DIY Complete How To Fix
http://www.iphoneshopusa.com/en/36-iphone-4-repair-kits-att-gsm If you have dropped your iPhone 4 and thinking about repairing it yourself then this video is for you! You can’t go wrong with this step by step HD tutorial. It will guide you from beginning to end. The most complete and best iPhone 4 dis-assembly and assembly tutorial on the Internet.
iPhone 4 Printable Screw Organizer sheet
iPhone 4 Complete front assembly LCD and Digitizer (Black)
iPhone 4 Complete front assembly LCD and Digitizer (White)
iPhone 4 Small Phillips and Flat Head Screwdriver
iPhone 4 Small Pentalobe Screwdriver
iPhone 4 Plastic Case Opener Tool
iPhone 4 Sim Tray Removal Tool
This tutorial will work for iPhone 4 AT&T or GSM
Head over to http://www.iphoneshopusa.com for all your iPhone 4 parts and complete iPhone 4 Do-It-Yourself Kits. Use coupon code YOUTUBE for 5% off your purchase.
Step 1 Remove the bottom 2 screws
Step 2 Remove the back cover
Step 3 Remove the battery
Step 4 Disconnect the dock connector cable.
Step 5 Remove 5 screws holding down the cable cover
Step 6 Remove the vibrator
Step 7 Disconnect 5 cables
Step 8 Remove screw using a flathead screwdriver
Step 9 Remove sticker and screw beneath
Step 10 Remove the SIM Card tray
Step 11 Remove 2 screws holding down the speaker assembly
Step 12 Remove the main board
Step 13 Remove the speaker assembly
Step 14 Remove 10 screws
Step 15 Remove the front panel assembly
Step 16 Remove the speaker cover mesh
Step 17 Place mesh on new front panel asssembly.
Step 18 Place the new front panel assembly on the frame.
Step 19 Reassembly everything in reverse order.
Step 20 Complete!
Please feel free to comment, rate, like, share, subscribe and visit: